Zte H3140 User Manual

4 Configure the Internet
Figure 4-17 Remote Service Port Control - IPv4 Page
Table 4-12 lists the remote service port control - IPv4 parameters.
Table 4-12 Parameter Descriptions for the Remote Service Port Control - IPv4
Parameter Description
HTTPS The remote service port control of HTTPS,the
default value is 443.
8. Click Apply button to apply the changes.
4.4.4 Configure the ALG
Abstract
By turning on the ALG switch, H3140 can convert the private network address in the lay-
er-4 information of the packet into a public network address, so that the external network
cannot know the private network IP address, thus improving security.
Steps
1. On the main page of the H3140, select Internet > Security > ALG to the ALG page,
the page see Figure 4-18.
Figure 4-18 ALG Configuration Page
2. Select the ALG services.
3. Click Apply button to apply the changes.
SJ-20210621164956-009 | 2021-12-07(R1.0) 33

Zte H3140 Specifications

General

Brand	Zte
Model	H3140
Category	Gateway
Language	English