8 Confidential and Proprietary Information of ZTE CORPORATION
Notes:
Do not put anything on the top of the router. Do not lay routers to overlap each other when using.
2. Wait 1～2 minutes after turning the router on before you use the service. The 3G & POWER indicator
should be lit on.
Notes:
When the router is turned off, an incoming caller will hear the prompt like “The number you have dialed
is currently unavailable.”
If the 2G/3G LED is blinking constantly, try to move the router to another location. The router takes
1~2 minutes to initialize, attach to the network and obtain an IP address.
Power Supply
For normal operation, connect the router to the external power adapter. In case of power failure or when
there is no available external power supply, the router will not work.
To Next Page
Loading...
Need help?
General
