To Next Page

To Previous Page

Projecting an HDMI Source or an Apple

Device

You can project contents via an HDMI cable when connecting

your Spro 2 to a laptop/PC or TV Set Top Box (STB). If you have

an Apple device with the Lightning connector, you need to get a

Lightning Digital AV Adapter (not included in the packaging).

1. Connect your Spro 2 to the laptop/PC or TV STB via the

supplied HDMI cable. (Laptop/PC or TV STB is not included

in the packaging.)

For Apple devices with the Lightning connector, connect the

device to the HDMI cable with the Lightning Digital AV

Adapter, and then connect the HDMI cable to Spro 2.

2. Turn on the projector. See Turning On/Off the Projector.

Other manuals for Zte Spro 2

Questions and Answers:

Need help?

Do you have a question about the Zte Spro 2 and is the answer not in the manual?

General