To Next Page

To Previous Page

There are several ways that you can turn on or off the projector.

 When your Spro 2‟s screen is turned on, swipe up or down

using THREE fingers on the screen to turn on or off the

projector.

 Drag the status bar down from the top of the screen and

touch Projector below Control Switch.

 From the HOME tab of the home screen, touch the round

button on the Projector widget.

 From the SETTINGS tab of the home screen, touch

Projector > Control and then touch the switch next to

Projector in the Projector settings screen.

 Press and hold the Power key and touch Turn on projector

or Turn off projector.

 If the projector floating button is enabled, touch to open

the options menu and touch (Projector off) or

(Projector on).

NOTE:

For best results, project onto a non-reflective white flat display

surface at a 90° angle to Spro 2‟s touch screen. The projection

distance of Spro 2 is about 2.3 to 12 feet.

Adjusting the Projection

When the projector is on, you can adjust projection focus,

keystone distortion, projection brightness and projection color.

To adjust projection focus:

Other manuals for Zte Spro 2

Questions and Answers:

Need help?

Do you have a question about the Zte Spro 2 and is the answer not in the manual?

General