3Com Switch 4210 Series User Manual

SFP Modules Supported for the Switch 4210 19
n
The Switch 4210 26-port, 18-port, and 9-port PWR models provide an
over-temperature protection mechanism. When the internal temperature exceeds
65°C (149
°F), they will stop providing power from all ports. When the temperature
is below 60°C (140
°F), they will continue to provide power from all ports.
SFP Modules
Supported for the
Switch 4210
The Switch 4210’s front panel provides one or two 1000 Mbps SFP ports in which
you can plug small form-factor (SFP) modules, which are described in Table 12.
n
■ The types of SFP modules may vary over time. Consult 3Com marketing
personnel or technical support personnel to obtain the latest information about
SFP modules.
■ For the SFP module specifications, refer to 3Com Transceiver Data Sheet.
Operating temperature 0°C to 45°C (30°F to 113°F)
Relative humidity
(non-condensing)
10% to 90%
Table 11 Technical specifications for the Switch 4210 PWR models
Model
Switch 4210
26-port PWR
Switch 4210
18-port PWR
Switch 4210
9-port PWR
Table 12 SFP modules supported by the Switch 4210s
Type
Model
100 Mbps SFP module
■ 3CSFP81
■ 3CSFP82
1000 Mbps SFP module
■ 3CSFP91
■ 3CSFP92
■ 3CSFP97
100 Mbps bidirectional (BIDI) module
■ 3CSFP9-81
■ 3CSFP9-82
1000 Mbps BIDI module
■ 3CSFP85
■ 3CSFP86
SFP stack module SFP-STACK-Kit

3Com Switch 4210 Series Specifications

General

Brand	3Com
Model	Switch 4210 Series
Category	Switch
Language	English