8 CHAPTER 1: PRODUCT INTRODUCTION
Introduction to the
Switch 4210 Family
PWR Switches
Switch 4210 9-port PWR Front panel
Switch 4210s 9-port PWR each provide eight 10/100Base-TX autosensing Ethernet
ports, one 10/100/1000Base-T Ethernet port, one 100/1000Base SFP ports, and
one Console port. The SFP port and the 10/100/1000BASE-T Ethernet port form a
Combo port. Either the SFP port or the 10/100/1000BASE-T Ethernet port can be
used at a time.
Figure 3 shows the front panel of an Switch 4210 9-port PWR.
Figure 3 Front panel of an Switch 4210 9-port PWR
Rear panel
Figure 4 The Switch 4210 9-port PWR model’s rear panel
Side panel
Each Switch 4210 9-port PWR provides a security slot through which you can lock
the device together with an irremovable object to prevent theft.
The security slot is located on the left side panel, as shown in Figure 7.
(1) 10/100Base-TX autosensing Ethernet port status LED
(2) Link LED for Combo port (3) Console port
(4) Power LED (PWR) (5) A/L LED
(6) D/S LED (7) Mode button
(8) Active LED for Combo port
(1) (2) (3) (4)
(5)(6)(7)(8)
(1) AC power socket (2) Grounding screw
To Next Page
Loading...
Need help?
General