ENG
30
6.9 Controlling blinds/roller blinds
All blinds and roller blinds integrated into your EIB/Powernet system can be controlled if this
has been configured in your project.
Manual
control
● To control the roller blind, select e.g. the
button "Roller blind" on the start page and
then the corresponding button.
● Use the arrow keys to move the
blinds/roller blinds up or down.
● Press briefly to stop and adjust slats.
● Press long to move up or down.
Fig. 51
Control by
time pro-
grammes
For information about roller blind control by time programme, see chapter: "Calling
up/modifying time programmes".
To Next Page
Loading...
Need help?
General
