￭ ACS880-01 frame R4
The figure below shows the drive package with its contents.
Drive with factory installed options8Straps1
Cardboard spacer9Cardboard support2
CDPI-01 assembly kit10Cushions3…5
Main cable clamp kit11Sleeve6
Panel holder12Trays7
To unpack:
• Cut the straps (1)
• Remove the top tray (7)
• Remove the cardboard spacer (9), cushions (5), cardboard support (2), panel holder (12) and main cable
clamp kit (11)
• Remove the sleeve
• Attach lifting hooks to the lifting eyes of the drive module. Lift the drive module with a hoist.
Mechanical installation 25
To Next Page
Loading...
Need help?
General
