Cable connection procedure – ACS880-11… and
ACS880-31… +P940 drive modules
Connect the power cables as described in the hardware manual.
Cable connection procedure (IEC) – ACS880-01… +P940
and +P944 drive modules
This section gives instructions on how to connect the power cables. For US cabling
instructions, see the quick installation guide.
￭ Preparing the cable ends for connection and making 360-degree
grounding at the cable entry plate
1. Peel off 3…5 cm (1 1/4 … 2 in) of the outer insulation of the cables at the cable entries
with the conductive sleeves for the 360° high-frequency grounding.
2. Prepare the ends of the cables.
Electrical installation 35
To Next Page
Loading...
Need help?
General
