Installation and commissioning guide
2750 515-1 EN, REV. 14, 2020-06-26
15
3 Delivery
3.1 Incoming inspection
• Make sure that all items have been delivered, refer to the packing list.
• Carefully inspect the bushings for shipping damage.
NOTE!
The bushing has been routine tested in oil, and there can be small quantities of oil remaining on
the oil-side of the bushing. Vaseline is used for lubrication of threads, and at some temperatures
Vaseline can appear as oil.
NOTE!
The oil-level is not shown correctly when the bushing is in the horizontal position.
3.2 Transportation
• The bushing must be transported in the transport box.
• The bushing must be transported in the horizontal position.
• Carefully inspect the bushing for damage after transportation.
3.3 Storage
Short term storage, less than 6 months
• The bushing can be stored outdoors, if it is in the transport box.
• Keep the transport box protected from water, when the bushing is stored outdoors.
• Keep the bushing dry, clean and protected against mechanical damage.
• The bushing can be stored in both the vertical, and horizontal positions.
NOTE!
The oil-level is not shown correctly when the bushing is in the horizontal position.
To Next Page
Loading...
Need help?
General
