- 102 -
000841BG
7 - Operation
Commissioning via ABB Installer for Solar Inverters mobile APP
ABB Installer for Solar Inverters APP is the new advanced ABB mobile
APP allow to simplify commissioning of large scale solar plant thanks to
the capability to set parameters of multi inverter simultaneously.
Even in case of single inverter installation it can be consider the most
suitable tool to be used.
ABB Installer for Solar Inverters APP is available for Android mobile devi-
ces with an Android version of 6.0.1 or greather (for iOS mobile devices
will be implemented soon) and could be downloaded and installed from
Play Store.
The requirements to complete the procedures are listed below:
- ABB Installer for Solar Inverters APP installed on mobile device.
- Enabled installer account for ABB Installer for Solar Inverters APP
The account could be created in the mobile app directly following the
dedicated wizard procedure.
- Manual claiming of the inverters to be commisioned.
The claiming process consist of indicating which inverters are to be com-
misioned
Claiming process can be executed by taking pictures of QR codes of
single inverter units (content in the Communication identication label)
(recommended); manual insertion both MAC address and related pro-
duct keys of all the inverters to commission; scanning and selecting of
SSIDs associated to the Wi-Fi networks generated by each inverter to
commission.
• Close the DC disconnect switches
15
to supply the inverter with input
voltage from the photovoltaic generator.
Make sure irradiation is stable and adequate for the inverter commissioning procedure to be
completed.
• Perform the installation wizard steps enabling the transfering the set-
tings to all the claimed inverters.
For more details about the procedure for commissioning with the ABB Installer for Solar In-
verters APP refer to dedicated documentation on the ABB solar website.
For any other specic settings of parameters of single inverters please refer to “Description of
the Web User Interface” chapter.