- 56 -
000833BG
5 - Installation
Mounting with a support bracket
Independentely from the mounting on vertical supports (wall, proles) or
horizontal supports the assembly instruction are the same (the differen-
ces will be detailed on the procedure steps). The assembly instruction
steps below are related to vertical mounting.
Bracket assembly
• Assembly the two side bracket
pieces together with the central
bracket, by sliding it as shown in
the picture and paying attention
to the orientation of the pieces
(refer to arrow and “UP” mar-
kings on the brackets): side bra-
ckets arrow have to be turned
downwards, central bracket have
to be turned upwards.
• Slide the central bracket in order
to match the two holes with the
centerning pins of the side bra-
ckets.
To Next Page
Loading...
Need help?
General