- 40 -
000017HG
3 - Safety and accident prevention
Hazardous areas and operations
Environmental conditions and risks
The device can be installed outdoors, but only in environmental conditions
that do not prevent its regular operation. These conditions are listed in the
technical data and in the installation chapter.
ABB IS NOT responsible for the disposal of the equipment: displays,
cables, batteries, accumulators, etc., and therefore the customer must
dispose of these items, which are potentially harmful to the environment,
in accordance with the regulations in force in the country of installation.
The same precautions shall be adopted for dismantling the equipment.
The device is not designed to operate in environments that are particularly inammable or
explosive.
The customer and/or installer must appropriately train operators or anyo-
ne who may come into close proximity of the equipment, and highlight,
with notices or other means where necessary, the hazardous areas or
operations at risk: magnetic elds, hazardous voltages, high temperatu-
res, possible discharges, generic hazard, etc.
Signs and labels
The labels afxed on the equipment must strictly NOT be removed, damaged, defaced,
hidden, etc.
The labels must be regularly cleaned and kept in sight, i.e. NOT hidden
by foreign objects and parts (rags, boxes, equipment, etc.)
The technical data provided in this manual does not in any case replace
that shown on the labels afxed on the equipment.
To Next Page
Loading...
Need help?
General