- 160 -
000847AG
8 - Maintenance
Procedure for dismantling the Inverter and wiring box
The inverter consists of an power module
01
, a wiring box
02
and a
mounting bracket
03
which may be dismantled separately.
To dismantling and disassemble the appliance, refer to the chapters:
Mounting with a support bracket
Follow the indications for the mounting procedure but in the reverse order
Perform the steps for “Turning off the inverter” based on the model, before removing the
wiring box or the inverter itself.
Never open the wiring box in the case of rain, snow or a level of humidity >95%.
Always carefully seal all unused openings.
Even though the device is equipped with an anti-condensation valve,
air with extremely high levels of humidity can lead to the creation of
condensation inside the inverter.
As the inverter is almost completely insulated from the outside,
condensation can also form after maintenance interventions in certain
weather conditions.
During dismantling always protect the inverter parts that are installed and exposed to the
weather elements!
IP66
To Next Page
Loading...
Need help?
General