Operation Manual / TPS44-F.. - TPS61-F..
Hazards during operation and
maintenance
Page 25
April 2015 HZTL2412_EN Revision E
Hazards during operation and maintenance
2.7
Mechanical hazards during operation
During normal operation, no mechanical hazards emanate from the
turbocharger if it has been installed properly.
Contact with rotating parts can lead to serious injuries. The
turbocharger must never be operated without a filter silencer or an air
suction branch. When the engine is at a standstill, the rotor can turn on
its own because of stack draught.
Operate the turbocharger in accordance with instructions.
During maintenance work, secure the rotor against unintentional
rotation.
Mechanical hazards when working on the turbocharger
During maintenance work, various risks can occur through the improper
handling of components, through the non-observance of work instructions,
due to inadequate care or as a consequence of insufficient training.
Serious personal injuries or accidents with fatal consequences can
occur through mechanical influences as a result of risky, improper
working methods.
Heed the general rules for work safety and accident prevention.
Ensure the safety of the work area.
Perform only those tasks that are described in this manual.
Perform work only for which training has been carried out.
© Copyright 2015 ABB. All rights reserved.
To Next Page
Loading...
Need help?
General
