ABB TPS F Series User Manual

Operation Manual / TPS44-F.. - TPS61-F..
Operation
4
Stopping the engine
4.5
Page 54
April 2015 HZTL2412_EN Revision E
Stopping the engine
4.5
CAUTION
Stopping the engine of oil-cooled turbocharger version
Heat in the turbocharger must be dissipated by the further circulating
lubricating oil.
 Post-lubricate for 15 … 20 minutes.
 Maintain oil pressure of 0.5 … 1.0 bar for post-lubrication.
CAUTION
Stopping the engine of water-cooled turbocharger version
Heat in the turbocharger must be dissipated.
 Allow turbocharger cooling water to run for 15 … 20 minutes after
stopping engine.
 Allow oil lubrication to continue running until rotor comes to a stop.
Further post-lubrication is not required and not recommended.
4.5
© Copyright 2015 ABB. All rights reserved.

ABB TPS F Series Specifications

General

Brand	ABB
Model	TPS F Series
Category	Industrial Equipment
Language	English