Operation Manual / TPS44-F.. - TPS61-F..
enance
Cleaning components mechanically
Page 66
April 2015 HZTL2412_EN Revision E
Cleaning components mechanically
5.4
Turbocharger components are sensitive to mechanical damage. The
use of needle guns or other impact tools, for example, damages the
components. Depending on the specification, nozzle rings and turbine
casings have protective coatings, which can also be damaged.
Only use soft tools such as cloths, brushes or wire brushes.
In the event of heavy contamination, the cleaning methods that have
been described such as soaking can be repeated until a satisfactory
result has been achieved.
Dispose of dirty water and cleaning agents in an environmentally
compatible manner, professionally and in accordance with valid local
regulations.
The disassembly and assembly of the components is described in
chapter Disassembly and assembly.
© Copyright 2015 ABB. All rights reserved.
To Next Page
Loading...
Need help?
General
