Design and function
14 TZIDC, TZIDC-110, TZIDC-120 42/18-84-EN
3 Design and function
Basic model Optional upgrades
Fig. 2: TZIDC, TZIDC-110, TZIDC-120 schematic diagram
Basic model Optional upgrades
1 LKS plug
1)
2 Positioning signal 4 ... 20 mA / bus connector 9 ... 32 V DC
3 Digital input
1)
4 Digital output
1)
5 Supply air: 1.4 ... 6 bar (20 ... 90 psi)
6 Exhaust
7 I/P module with 3/3-way valve
8 Position sensor (optional up to 270° rotation angle)
9 Plug module for analog feedback (4 ... 20 mA)
1)
10 Plug-in module for safety shutdown (forced depressurization)
11 Plug module for digital feedback
1)
12 Installation kit for mechanical position indicator
13 Installation kit for digital feedback with proximity switches
14 Installation kit for digital feedback with 24 V microswitches
IMPORTANT (NOTE)
With optional upgrades either the “Installation kit for digital feedback with proximity switches” (13) or the “Installation
kit for digital feedback with microswitches 24 V” (14) can be used.
In both cases, the “mechanical position indicator” (8) must be installed.
1) TZIDC only
Functionality
The TZIDC, TZIDC-110, TZIDC-120 is an electronically configurable positioner with
communication capabilities designed for mounting on pneumatic linear or rotary actuators.
Fully automatic determination of the control parameters and adaptation to the final control
element yield considerable time savings and an optimal control behavior.
To Next Page
Loading...
Need help?
General
