—
1. Your safety first - at all times
DANGER!
Pay special attention to the hazard notes in the instruction manual marked with
this warning symbol.
• Make sure that the specified criteria are not exceeded under switchgear
operating conditions.
• Ensure the instruction manual is accessible to all personnel involved in
installation, operation, and maintenance.
• The user’s personnel must act responsibly in all matters related to safety at work
and correct handling of the switchgear.
• Ensure that the switchgear or switchboard and accessories are stored in closed
room, free of dust and moisture till erection.
• Ensure that installation, operation, and maintenance are carried out by only
trained, qualified and authorized personnel
UNIGEAR ZS2 INSTALLATION, OPERATION AND MAINTAINANCE INSTRUCTION MANUAL
To emphasize on safety, our installation, operation, and maintenance manual begins
with the following recommendations:
Only install switchgear in closed rooms suitable for electrical equipment. Ensure
that installation, operation and maintenance is only carried out by qualified
competent electricians only and the responsibilities after the ex-works delivery are
clarified. Fully comply with the legally recognized standards (IEC or local), the
connection conditions of the local electrical utility and the relevant safety at work
regulations.
Observe the relevant information in the instruction manual for all actions involving
switchgear. Using of safety clothes like safety gloves according to EN 388 Blade cut
resistance class 5, long sleeved work jacket or safety sleeves, safety shoes is
recommended during all activities done with the switchgear.
To Next Page
Loading...
Need help?
General
