Accu-Chek ADVANTAGE Owner's Booklet

Setting the Time and Date
Setting the time and date is important if you use the meter’s memory or connect to a computer.
Chapter 1: Understanding Your New System ACCU-CHEK Customer Care Service Center 1-800-858-807211
1. Press and release (On/Off
button) to turn on the meter.
Wait for the flashing test strip
or
“---”.
2. Press and hold until “set”
appears, and then release it.
The word “On” and the beeper
symbol appear.
3. Press and release to see
the hour flash in the upper left
corner.

Accu-Chek ADVANTAGE Specifications

General

Test Time	30 seconds
Memory	20 values with date and time
Battery	One 3-volt lithium battery (CR2032)
Dimensions	133 x 64 x 27 mm
Weight	95 g (with batteries)
Measurement Range	10-600 mg/dL
Operating Conditions	10% to 90% relative humidity