Wait for the motor to stop before
you open the meter.
Keep the vial until the test drum is empty and
removed from the meter. When performing a quality
control test, you will need to refer to the expected
values printed on the vial label.
The test drum can only be
inserted in one direction.
27
Getting Started
26
Installing the Test Drum
1. If the meter is on, press
the TEST button to
turn it off. With the
meter turned off, slide
the release button
toward the display to
open the test drum
compartment.
2. Remove a new test
drum from the vial.
3. Insert the new test drum
by sliding it onto the
plastic post located
inside the test drum
compartment.
To Next Page
Loading...
Need help?
General
