EasyManuals Logo

Acer Altos R720 Series User Manual

Acer Altos R720 Series
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
99
BIOS setup
BIOS setup is a hardware configuration program built into the system's
Basic Input/Output System (BIOS). Since most systems are already
properly configured and optimized, there is no need to run this utility.
The BIOS setup utility stores basic settings for your server. You will need
to run this utility under the following conditions:
When changing the system configuration
When a configuration error is detected by the system and you are
prompted ("Run Setup" message) to make changes to the BIOS
setup
Note: If you repeatedly receive Run Setup messages, the battery
may be bad. In this case, the system cannot retain configuration
values in CMOS. Ask a qualified technician for assistance.
When redefining the communication ports to prevent any conflicts
When changing the password or making other changes to the
security settings
BIOS setup loads the configuration values in a battery-backed
nonvolatile memory called CMOS RAM. This memory area is not part of
the system RAM which allows configuration data to be retained when
power is turned off.
Before you run BIOS setup, make sure that you have saved all open
files. The system reboots immediately after you close the setup.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acer Altos R720 Series and is the answer not in the manual?

Acer Altos R720 Series Specifications

General IconGeneral
BrandAcer
ModelAltos R720 Series
CategoryServer
LanguageEnglish

Related product manuals