2-26 System Utilities
Using UUIDTools 0
The UUID (Universally Unique Identifier) Tool copies BIOS information to EEPROM
(Electrically Erasable Programmable Read-Only Memory). Used in the DMI pool data for
hardware management.
To update the DMI Pool, perform the following:
1. Unzip UUID package tool to USB Flash Disk.
2. Boot from USB and excute stuuid20.exe under DOS mode. (Figure 2-29)
3. At the command prompt, run VEEPROM.exe to write any changes in the data to the
EEPROM.
Figure 2-29. UUID Tool Main Screen