System Utilities 2-17
BIOS flash process begins. (Figure 2-16)
Figure 2-16. Updating Flash ROM Blocks
7. Flash is complete when the message, Flash Programming Complete is shown.
System will restart automatically when finished.
If AC power is not connected, the following message is shown (Figure 2-17). Plug in the
AC power to continue.
Figure 2-17. AC Power Warning
X.XXx
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
ZRJ
ZRJ
0.05
0.08
1.4c
Warning: No AC power connect
To Next Page
Loading...
Need help?
General