ICR-3241
1. Product Overview
1.1 Product Introduction
ICR-3241 is an industrial cellular router intended for the North American market (NAM). This
router is an ideal device for wireless communication in mobile networks that make use of LTE
and WCDMA technology. Due to the high speed of data transfer up to 150 Mbps (download)
and up to 50 Mbps (upload) is this router an ideal solution for specialized M2M devices and IoT
as well as for wireless connection of traffic and security camera systems, individual computers,
LAN networks, automatic teller machines (ATM) and other self-ser vice terminals.
The standard configuration includes two Ethernet 10/100 ports, serial line RS232, RS485,
one binary input and one output. The device also has two readers for 3 V and 1.8 V SIM
cards, which are located on the left panel of the router. The router can be equipped with
a WiFi module, but this must be part of the initial configuration – it cannot be assembled to the
router at some point in the future. The router can be provided only in a metal casing.
Configuration of the router may be done via a password-protected Web interface. Web in-
terface provides detailed statistics about the router’s activities, signal strength, detailed system
log etc. The router supports the creation of VPN tunnels using IPSec, OpenVPN and L2TP
to ensure safe communication. DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS,
backup primary connection and many other functions are supported.
The router provides diagnostic functions which include automatically monitoring the PPP
connection, automatic restart in case of connection losses, Low Power Mode, and a hardware
watchdog that monitors the router status. The user may insert Linux scripts which are started
on various actions. It is possible to create up to four different configurations for the same
router. These configurations can be switched whenever necessary via Web inter face, SMS or
binary input status. The router can automatically upgrade its configuration and firmware from
your central server. This allows for mass reconfiguration of numerous routers at the same
time.
The router also supports additional software like R-SeeNet for permanent traffic monitoring
of routers.
Examples of possible applications
• mobile office
• fleet management
• security system
• telematic
• telemetric
• remote monitoring
• vending and dispatcher machines
2
To Next Page
Loading...
Need help?
General
