- 37 -
y Format the memory, see page 43. The folder number and file number are initialized and
renumbered from 100 and 0001 respectively.
Setting the TV Out
Your camera can be connected to a TV allowing you to preview images and movie clips on the
television screen. TV Out should be set to either NTSC or PAL depending on your region. For
detail operation, see page 17, 44.
Option Description
NTSC America, Japan, Taiwan, Korea
PAL All of Europe
Setting USB Port
You can set USB mode to connect the camera with a printer or computer. For detail operation,
see page 17, 44.
Option Description
Computer To connect your camera to a PC.
Printer To connect your camera to a printer.
Choosing a Startup Image
You can choose a recorded image as the start-up image.
1. Set the camera to the Playback mode (see page 14).
2. Press or to select a desired image.
3. Press the MENU button, then press or to select
S.IMAGE ( ).
4. Press or to select an option, and then press the
SET button.
5. Set the camera to the Setup Menu (see page 17).
6. Press or to select S.IMAGE ( ) then press or
the SET button.
7. Press or to select a desired image and press the
SET or the MENU button to apply the setting.
8. Press the MENU button to close the menu.
NOTE:
y Do not change the folder and file names in the memory card using your computer. It may
be unable to playback the data using the digital camera.
To Next Page
Loading...
Need help?
General
