- 39 -
Resetting to Default Settings
You can reset the entire menu and button operation settings to initial default.
1. Set the camera to the Setup Menu (see page 17).
2. Press or to select RESET ALL ( ) then press or the SET button to launch the
submenu.
3. Press or to select YES then press the SET button to reset all settings.
Making Connections
Connecting the Camera to a TV
Images displayed on the camera’s monitor screen can also be displayed on a television.
1. Use the included audio/video cable to connect the
camera to the TV set.
2. Set the TV input signal to Video In. Refer to the
documentation included with your TV for more
information.
3. Everything that would normally appear on the camera’s
LCD screen, such as photo and video clip playback,
slide shows, and image or video capture, appears on
the TV.
Connecting the Camera to a PC
There are two ways to download files from the camera’s internal memory or memory card to a
computer:
y by inserting the memory card into a card reader
y by connecting the camera to a computer using the included USB cable
NOTE:
y The camera LCD screen turns off automatically during video output.
NOTE:
y The following settings do not change with this procedure:
y Date & Time setting
y Language setting
y TV out setting
To Next Page
Loading...
Need help?
General
