Setting Up the Oscilloscope
To inspect options and accessories
1-5
To inspect options and accessories
❏ Verify that you received the accessories you ordered and that none were
damaged.
If anything is missing, contact your nearest Agilent Technologies Sales Office.
If the shipment was damaged, or the cushioning materials show signs of stress,
contact the carrier and your Agilent Technologies Sales Office.
Some accessories that will enhance your work with the oscilloscope are listed in
table 1-1.
Table 1-1
Accessories for the Infiniium Oscilloscopes
Agilent Model
Number
Description
01144-61604 1:2 Probe Power Fan-Out (for use with 1144A and 1145A)
10076A 4 kV, 250 MHz High Voltage Probe
10467-68701 4 IC Clips, 0.5 mm
N2771A 10 kV, 50 MHz High Voltage Probe
10450A SMT Probe Accessory Kit
10833A GPIB cable, 1 m
10833B GPIB cable, 2 m
10833C GPIB cable, 4 m
10833D GPIB cable, 0.5 m
1142A Probe control and power module
1184A Testmobile with keyboard and mouse tray, accessories draw
1250-2427 PC Board Mini-Probe Socket (horizontal mount)
1250-2428 PC Board Mini-Probe Socket (vertical mount)
34398A
34399A
RS-232-C printer cable
RS-232-C Adapter kit
54006A 6 GHz probe, 10:1 (500
Ω) or 20:1 (1 kΩ), 0.25 pf
1146A AC/DC Current Probe 100 kHz
1147A AC/DC Current Probe 50 MHz
1153A 200 MHz Differential Probe
1154A 500 MHz Differential Probe
1155A 750 MHz 2-Channel, Low-Mass Active Probe
To Next Page
Loading...
Need help?
General
