150
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\gsm_man_measurements.fm
GSM Mobile Measurements
Measuring Output RF Spectrum
1. Establish a call with the mobile.
2. Press the
Measurement selection key.
3. Select the Output RF Spectrum measurement.
4. Press the ORFS Setup (
F1) key.
5. Press the Measurement Setup (
F1) key.
6. Set the measurement parameters as needed for your measurement, including:
Measurement Timeout = 20 s.
7. Press the Modulation Frequencies (
F2) key and set up your required offset
frequencies for ORFS due to modulation.
8. Press the Switching Frequencies (F3) key and set up your required offset
frequencies for ORFS due to Switching.
9. Press the Close Menu (
F6) key.
10.Press the Return to ORFS Control (
F6) key.
11.Press the Change View (
F2) key.
To Next Page
Loading...
Need help?
General
