Agilent Technologies InfiniiVision 2000 X-Series User Manual

107
Agilent InfiniiVision 2000 X-Series Oscilloscopes
User's Guide
s1
8
Labels
To turn the label display on or off 107
To assign a predefined label to a channel 108
To define a new label 109
To load a list of labels from a text file you create 110
To reset the label library to the factory default 111
You can define labels and assign them to each analog input channel, or
you can turn labels off to increase the waveform display area. Labels can
also be applied to digital channels on MSO models.
To turn the label display on or off
1 Press the [Label] key on the front panel.
This turns on labels for the displayed analog and digital channels.
Labels are displayed at the left edge of the displayed traces.
The figure below shows an example of displayed labels.

Agilent Technologies InfiniiVision 2000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 2000 X-Series
Category	Test Equipment
Language	English