Agilent Technologies InfiniiVision 2000 X-Series User Manual

Web Interface 20
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 263
Remote Programming via the Web Interface
To send remote programming commands to the oscilloscope via the SCPI
Commands applet window:
1 Access the oscilloscope's web interface (see "Accessing the Web
Interface" on page 258).
2 When the oscilloscope's web interface is displayed, select
Browser Web Control, then select Remote Programming.
The SCPI Commands applet appears within the browser web page.

Agilent Technologies InfiniiVision 2000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 2000 X-Series
Category	Test Equipment
Language	English