Agilent Technologies InfiniiVision 2000 X-Series User Manual

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 5
In This Guide
This guide shows how to use the InfiniiVision 2000 X-Series oscilloscopes.
When unpacking and using the
oscilloscope for the first time, see:
• Chapter 1, “Getting Started,” starting on page 19
When displaying waveforms and
acquired data, see:
• Chapter 2, “Horizontal Controls,” starting on page 43
• Chapter 3, “Vertical Controls,” starting on page 55
• Chapter 4, “Math Waveforms,” starting on page 63
• Chapter 5, “Reference Waveforms,” starting on page
77
• Chapter 6, “Digital Channels,” starting on page 81
• Chapter 7, “Display Settings,” starting on page 101
• Chapter 8, “Labels,” starting on page 107
When setting up triggers or changing
how data is acquired, see:
• Chapter 9, “Triggers,” starting on page 113
• Chapter 10, “Trigger Mode/Coupling,” starting on
page 135
• Chapter 11, “Acquisition Control,” starting on page 143
Making measurements and analyzing
data:
• Chapter 12, “Cursors,” starting on page 159
• Chapter 13, “Measurements,” starting on page 169
• Chapter 14, “Mask Testing,” starting on page 189
• Chapter 15, “Digital Voltmeter,” starting on page 201
When using the built-in waveform
generator, see:
• Chapter 16, “Waveform Generator,” starting on page
205
When saving, recalling, or printing,
see:
• Chapter 17, “Save/Recall (Setups, Screens, Data),”
starting on page 217
• Chapter 18, “Print (Screens),” starting on page 231
When using the oscilloscope's utility
functions or web interface, see:
• Chapter 19, “Utility Settings,” starting on page 237
• Chapter 20, “Web Interface,” starting on page 257
For reference information, see: • Chapter 21, “Reference,” starting on page 273

Agilent Technologies InfiniiVision 2000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 2000 X-Series
Category	Test Equipment
Language	English