17 18
1.2 Getting started
1.2.1 Set up
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Power off your phone
before inserting or removing the SIM card.
4009X
4009D
SIM1
SIM2
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
and slide it out.
For dual SIM models, both SIM1 and SIM2 can support 2G and
3G networks. If both of them are 3G SIM cards, only one card can
support 3G network
(1)
. Your phone only supports mini-SIM card. Do
not attempt to insert other SIM types like micro and nano cards,
otherwise you may damage your phone.
Installing or removing the battery
Power off your phone before removing the battery.
•Insert and click the battery into place, then close the cover.
•Unclip the cover, then remove the battery.
Installing the microSD card
To install, open microSD card lock first, and then place the external
microSD card into the slot with the gold contact facing down. To remove
the external microSD card, open microSD card lock and take it out from
the slot.
(1)
4009D only.
To Next Page
Loading...
Need help?
General
