Publication 2711C-UM001I-EN-P - July 2014 15
Overview Chapter 1
Terminal Users
Copy the help files to the WebHelp folder off the root directory of the SD
memory card or USB flash drive into a folder named \WebHelp.
Emulator Users
Copy the help files to the WebHelp folder in the shared directory of the emulator,
for example, C:\Documents and Settings\All Users\Shared
Documents\Allen-Bradley\PanelView Component Emulator\WebHelp.
View Help Files
After copying the help files to external media and inserting the media in the
terminal, you can view the help files by closing this help window and clicking the
help ? button again.
Peripheral Connection
PanelView Component terminals have a USB host port. You can power USB
peripherals directly from the PanelView Component terminal. If the USB
peripheral is not powered directly from the PanelView USB port either:
• install the USB peripheral in the same enclosure as the PanelView terminal
and make sure it is connected to the same ground system.
• connect to the USB peripheral through a galvanically isolated hub.
When receiving updated help files, you may have to clear cache in
your browser before the new help files display.
View the PanelView Explorer online Help for detailed instructions.
ATTENTION: Removing the USB flash drive or SD card, from the
PanelView Component terminal, while a firmware upgrade is in process,
could corrupt the firmware and make the terminal unusable. Take
precautions to prevent the USB flash drive or SD card from being
accidentally disconnected. Also, do not power off the terminal while a
firmware upgrade is in progress.
ATTENTION: USB hubs can produce unexpected behaviors and as a
result are not recommended.
To Next Page
Loading...
Need help?
General
