Allen-Bradley PanelView 2711C-F2M User Manual

74 Publication 2711C-UM001I-EN-P - July 2014
Chapter 4 Cable Connections and Communication
2. After the driver installation is complete, you may see a dialog box similar to
the one shown here.
Cycle power to the terminal and reconnect the USB cable.
3. This dialog box appears.
4. Select the Finish installing software (recommended) option to continue
installing the boot loader driver.
5. Installation is complete when this dialog box appears.

Allen-Bradley PanelView 2711C-F2M Specifications

General

Brand	Allen-Bradley
Model	PanelView 2711C-F2M
Category	Touch terminals
Language	English