Rockwell Automation Publication 750-IN105D-EN-P - June 2018 29
PowerFlex 750-Series Service Cart and DC Precharge Module Lift
Storage, Maintenance, and Customer Support
Store the Service Cart and the DCPC Module Lift
Follow these steps to fold the service cart for storage. For more information, see Setup the Service Cart on page 4.
1. Lower the carriage assembly and lock the carriage trolley by inserting the locking pin.
2. Retract the bridge span and tie-in plate.
3. Retract the undercarriage.
4. Retract the handle.
5. Lower for stability.
To store the DCPC module lift, verify that the auto-lock is engaged. Store DCPC module lift with service cart.
Maintenance for the Service Cart and the DCPC Module Lift
Inspect the service cart and DCPC module lift for damage or excessive wear before each use.
Lubricate the jackscrew and thrust bearing on the service cart every 2 years. Renolit ST-80 lithium grease is recommended.
2
3
4
5
1
To Next Page
Loading...
Need help?
General
