Alpine CDE-171R User Manual

19-EN
3 Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
 Setting item:
TUNER mode:
TUNER SET
*1
 VOL LV ADJ
*2
 DIMMER
*3
DISC mode:
CD SET
*4
 VOL LV ADJ
*2
 DIMMER
*3
USB mode:
VOL LV ADJ
*2
 DIMMER
*3
iPod mode (CDE-171R/CDE-171RR/CDE-171RM):
APP DIRECT
*5
 iPod SET
*6
 VOL LV ADJ
*2
 DIMMER
*3
AUX mode:
AUX SET
*7
 VOL LV ADJ
*2
 DIMMER
*3
*1 The setting items are the same as TUNER setting in SETUP
mode. For details, refer to “SETUP” on page 19.
*2 You can individually emphasize or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linkage. Refer to “Setting the Source Volume Level” on
page 16.
*3 Refer to “Dimmer Control” on page 20.
*4 PLAY MODE can be selected in this mode. For details, refer
to “Playing MP3/WMA/AAC Data (PLAY MODE)” on
page 20.
*5 Refer to “Setting the iPod Control” on page 23.
*6 The setting items are the same as iPod setting in SETUP
mode. For details, refer to “iPod/iPhone Setting” on page 21.
*7 AUX NAME can be selected in this mode. For details, refer to
“Setting the AUX NAME mode” on page 20.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
AUDIO
*1
 GENERAL  DISPLAY  TUNER  iPod
*2
GENERAL:
FAV SE TUP  MENU LANG  AUX SETUP  AUX NAME
*3

PLAY MODE  DEMO
DISPLAY:
DIMMER  TEXTSCROLL
TUNER:
AF
*4
 REGIONAL
*5
 PI SEEK
*6
iPod:
iPod LIST
*1 Refer to “Audio Setup” on page 15.
*2 CDE-171R/CDE-171RR/CDE-171RM only.
*3 Displayed only when AUX SETUP is set to ON.
*4 Refer to “Turning AF (Alternative Frequencies) ON/OFF” on
page 10.
*5 Refer to “Receiving RDS Regional (Local) Stations” on page 10.
*6 Refer to “PI SEEK Setting” on page 10.
3 Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4 Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF.)
5 Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press r to return to the previous mode.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
FAV
AUDIO/SETUP
/ENTER

Rotary encoder

Alpine CDE-171R Specifications

General

Brand	Alpine
Model	CDE-171R
Category	Car Receiver
Language	English