Alpine iDA-X313 User Manual

22-EN
Use the SETUP menu to flexibly customize the unit to suit your own
preferences and usage. Choose settings from GENERAL, DISPLAY,
etc., to make the desired changes.
iDA-X313
iDA-X311/iDA-X311RR
1 Press and hold FUNCTION/SETUP for at least 2
seconds to activate the SETUP selection mode.
2 Turn the Double Action encoder (iDA-X313 only)
or Rotary encoder (iDA-X311/iDA-X311RR only) to
select the desired item, and then press
/ENTER.
BT*
1
AUDIO*
2
GENERAL DISPLAY IPOD
TUNER B T
(e.g. Select GENERAL)
*
1
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
*
2
Displayed only when an external audio processor is connected. For
details, refer to the Owner’s Manual of the external audio processor.
3 Turn the Double Action encoder (iDA-X313 only)
or Rotary encoder (iDA-X311/iDA-X311RR only) to
select a setting item, and then press
/ENTER.
(e.g. Select POWER IC)
BT:
BT IN
AUDIO*
3
:
USER PRESET*
4
MX*
4
SUBW*
4
MX LEVEL *
5
USER PRESET *
4
GENERAL:
PLAY MODE BEEP *
6
INT MUTE *
7
AUX+
AUX+ NAME *
8
AUX AUX NAME *
8
DIGITAL AUX
D-AUX NAME *
9
AUX IN GAIN *
10
POWER IC DEMO
PLAY MODE
DISPLAY:
DIMMER SCROLL TYPE TEXT SCROLL
LANGUAGE DIMMER
IPOD:
PLAYLISTS ARTISTS ALBUMS PODCASTS
AUDIOBOOKS GENRES COMPOSERS SONGS
PLAYLISTS
TUNER:
FM LEVEL RDS REGIONAL*
11
ALERT PTY31*
12
PI SEEK*
13
FM LEVEL
*
3
If IMPRINT audio processor is connected, you can make more
detailed settings for the audio setting. For details, refer to
“IMPRINT
Operation (Optional) (iDA-X313 only)” (page 25).
*
4
Displayed only when an external audio processor is connected.
*
5
Displayed only when MX is set to ON and an external audio
processor is connected. (or the IMPRINT audio processor is
connected (iDA-X313 only)).
*
6
iDA-X313 only.
*
7
Displayed only when BT IN is OFF.
*
8
The setting can be made only when AUX+/AUX is set to ON.
*
9
Displayed only when DIGITAL AUX is set to ON.
*
10
Displayed only when AUX+ is set to ON.
*
11
Refer to “Receiving RDS Regional (Local) Stations” (page 8).
*
12
Refer to “Setting PTY31 (Emergency Broadcast) reception” (page 9).
*
13
Refer to “PI SEEK Setting” (page 8).
4 Turn the Double Action encoder (iDA-X313 only)
or Rotary encoder (iDA-X311/iDA-X311RR only) to
change the setting, and then press
/ENTER.
(e.g. Select POWER IC ON or POWER IC OFF.)
5 Press and hold for 2 seconds to return to normal
mode.
• Pressing during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Select BT from the setup main menu in step 2 above.
If an optional BLUETOOTH INTERFACE (KCE-400BT) is connected,
you can place a hands-free call by a BLUETOOTH- equipped mobile
phone.
Make this setting when the BLUETOOTH INTERFACE (KCE-400BT)
is connected and the BLUETOOTH function is used. For details, refer to
the Owner’s Manual of the optional BLUETOOTH INTERFACE
(KCE-400BT).
Set ADPT when the BLUETOOTH INTERFACE (KCE-400BT) is
connected.
SETUP
Follow steps 1 to 5 to choose an item to change. See
the item descriptions following step 5 for further
details.
Double Action encoder
FUNCTION/SETUP
BAND/TA
/ENTER
SOURCE
Rotary encoder
FUNCTION/SETUP
BAND/TA
/ENTER
SOURCE
BLUETOOTH Setting

Alpine iDA-X313 Specifications

General

MP3 playback	Yes
FM band range	87.5 - 108 MHz
Supported radio bands	FM, LW, MW
Preset stations quantity	30
Display type	LCD
Output power	180 W
Product color	Black
Equalizer bands quantity	5
Signal-to-Noise Ratio (SNR)	65 dB
File type	MP3, AAC, WMA
Key illumination color	Blue

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	178 x 156 x 50 mm