NOTIFICATIONS
Vecto r H® S eries ▪ Opera tor’s Manual ▪ M N-462 9 5 ▪ Rev 7 ▪ 6/22
106
Conditions for Ovens Installed in New York
City
▪ Operating instructions in the manual must be read and understood by all
persons using the appliance. The person responsible for training of the
operators is responsible for the safekeeping of the manual.
▪ Prior to installation, plans specifying the exact product name/model number and
dimensions/specifications shall be filed with and approved by New York City
Department of Buildings (DOB). A copy of DOB docketed (Stamped, numbered
and dated) plans shall be transmitted to the Fire Department for review and
approval, as applicable.
▪ Installation, maintenance, and cleaning procedures shall comply with all
applicable New York City Fire Code, New York City Electric Code, New York City
Construction Codes (including the Building Code and the Mechanical Code), and
rules.
▪ The cooking equipment shall be used for light duty cooking ad food warming
only, and shall be provided with catalyst to limit the emission of grease-laden air.
▪ The cooking equipment shall be installed in an area approved by the New York
City Department of Buildings.
▪ Underwriters Laboratories, Inc.'s listing requirements and manufacturer's
installation, operation and maintenance requirements shall be complied with.
▪ The cooking equipment (including filters and catalyst) shall be inspected, cleaned
and replaced if necessary, by a qualified person holding a Fire Department
Certificate of Fitness. They catalyst shall be maintained in proper working order.
A record of such inspection and cleaning shall be kept on the premises for
inspection.
▪ All installations are subject to inspection by representatives of the Bureau of Fire
Prevention which may result in additional requirements being imposed.
▪ The Fire Department’s condition of approval shall be provided to all New York
City buyers, users and installers.
▪ Certificate of Approval number shall be plainly and permanently stamped or
otherwise fixed upon each product by the manufacturer or the local
representative of the manufacturer.
▪ The equipment’s technology does not violate any patent, trade name, trade
secret or other intellectual right.
▪ The Certificate of Approval does not constitute an endorsement or
recommendation of the product by the Fire Department, but is a certification that
the product is acceptable as of the date of issuance.
▪ The Fire Department may withdraw this approval at any time in the event there is
a reasonable doubt that the product does not operate or perform as required by
code, the conditions of the resolution or as represented in the application.
▪ Any end user who fails to comply with the conditions as outlined in this approval
will be subject to enforcement action.
To Next Page
Loading...
Need help?
General
