INSTALLATION
Vecto r H® S eries ▪ Operat or’s M anual ▪ M N-46 2 95 ▪ Rev 7 ▪ 6/22
39
How to Install the Oven on a Stand
(VMC-H2/H2H, VMC-H3/H3H, VMC-H4/H4H)
Before you begin Make sure you have:
▪ The appropriate stand for your oven
▪ Regulation UL 197, 91.8
▪ An appropriate lifting device, and enough personnel, to safely move and position
the weight of the oven.
□ VMC-H2/H2H: 213 lb (97 kg)
□ VMC-H3/H3H: 278 lb (126 kg)
□ VMC-H4/H4H: 348 lb (158 kg)
Procedure To install the ovens on a stand, do the following.
Step Action
1. Lift the oven using an appropriate lifting device. Remove the feet a, or if
the unit has casters
b, remove them including the mounting plates.
Note the location of the fasteners c and remove them from the stand.
Save the fasteners for re-use.
Continued on next page
VMC-TS-010946
a
b
c
To Next Page
Loading...
Need help?
General
