INSTALLATION
Vecto r H® S eries ▪ Opera tor’s Manual ▪ M N-462 9 5 ▪ Rev 7 ▪ 6/22
46
How to Install the Oven on Casters (if required)
Before you begin Make sure you have:
▪ The appropriate stand for your oven
▪ Regulation UL 197, 91.8
▪ An appropriate lifting device, and enough personnel, to safely move and position
the weight of the oven.
□ VMC-H2/H2H: 213 lb (97 kg)
□ VMC-H3/H3H: 278 lb (126 kg)
□ VMC-H4/H4H: 348 lb (158 kg)
□ VMC-H2HW: 243 lb (110 kg)
□ VMC-H3HW: 312 lb (142 kg)
Install casters on
lower oven
(if required)
Some stand-oven combinations require installing casters on the oven meant to
be under the stand.
To install the casters on the lower oven, do the following.
Step Action
1. Lift the oven using an appropriate lifting device. Remove the feet a. Attach
each caster
b with fasteners as shown.
Continued on next page
To Next Page
Loading...
Need help?
General
