Alto-Shaam Vector VMC-H3 User Manual

INSTALLATION
Vecto r H® S eries ▪ Opera tor’s Manual ▪ M N-462 9 5 ▪ Rev 7 ▪ 6/22
48
How to Install the Jet Plates
(VMC-H2HW, VMC-H3HW)
Background Each jet plate assembly consists of one inner panel and one outer panel. There
are two unique jet plate assemblies used on the Vector Wide oven. The
difference is in the outer panel used. One type (5029095) is used on the lower
section of each chamber. The other type (5030451) is used on the upper section
of each chamber. The inner panels used are the same for both types of
assemblies.
Procedure
To install the jet plates, do the following.
Step Action
1. Each outer panel has the part number etched into the right corner. Locate
the part number on all outer panels. Place an outer panel on a table with the
part number facing up.
Continued on next page
VMC-TS-014314
50290955030451
50290955030451
VMC-TS-014317
5030451
5029095

Alto-Shaam Vector VMC-H3 Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-H3
Category	Oven
Language	English