Alto-Shaam Vector VMC-H3 User Manual

INSTALLATION
Vecto r H® S eries ▪ Opera tor’s Manual ▪ M N-462 9 5 ▪ Rev 7 ▪ 6/22
40
Continued from previous page
2. While the oven is still on the lifting device, measure the distance between the
mounting holes of the legs/casters (X and Y).
3. Place the oven on the stand. Use the hole pattern d on the stand that
corresponds to the hole pattern of the oven measured in step 2. Connect the
oven to the stand using the hardware
e removed in step 1.
Result The oven is now installed to the stand.
VMC-TS-010948
X
Y
VMC-TS-010955
d
e

Alto-Shaam Vector VMC-H3 Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-H3
Category	Oven
Language	English