Alto-Shaam Vector VMC-H3 User Manual

INSTALLATION
Vecto r H® S eries ▪ Opera tor’s Manual ▪ M N-462 9 5 ▪ Rev 7 ▪ 6/22
52
Continued from previous page
4. Scroll to “Connection settings”. Touch the Setup Network icon d.
The available networks will show on the screen. The color of the network
icon indicates the strength of the signal for each network.
Green = strong
Red = weak
If the network to be used is not displayed, continue with step 5.
5. If the network is not displayed, touch the “Add network” icon e.
Enter the SSID using the keypad. Then, touch the arrow key.
Enter the security type. Then, touch the check mark.
Enter the password using the keypad. Then, touch the arrow key.
Touch the check mark when finished.
Result The procedure is now complete.
XXX
XXXXX
XXXXX
AS-TS-009345
Connections Settings
MAC
Setup Network
IP
Install certificates
d
AS-TS-008285
Add network
Add network
AS-TS-009341
Add Network
Network name
Security
Password
XXX
XXX
XXX
Add Network
Network name
Security
Password
e

Alto-Shaam Vector VMC-H3 Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-H3
Category	Oven
Language	English