MAINTENANCE
Vecto r H® S eries ▪ Operat or’s M anual ▪ M N-46 2 95 ▪ Rev 7 ▪ 6/22
93
Continued from previous page
3. Separate the jet plates. Flexing the jet plates outward can aid in separating
the jet plates.
4. Spray the cooking racks and jet plates with Alto-Shaam non-caustic oven
cleaner
c, CE-46828. Follow safety instructions on cleaner bottle. Let the
cleaner work for 3–5 minutes. Scrub with a non-abrasive scrub pad. Rinse
with water. Wipe with a soft cloth.
5. Remove the grease filters e if equipped.
6. Spray the interior surfaces of the oven with Alto-Shaam non-caustic oven
cleaner, CE-46828. Also spray the grease filters. Let the cleaner work for 3–5
minutes. Scrub with a non-abrasive scrub pad. Remove any residue with a
water-soaked towel.
7. Remove the cooling fan filters f. Clean with a mild cleaner and rinse with
hot water.
8. Re-install the grease filters and the cooling fan filters.
9. Clean the door glass d with Windex® or equivalent glass cleaner.
10. Re-install the jet plates and cooking racks. See topic How to Install the Jet
Plates.
Continued on next page
NOTE: Replace the cooling fan filters at least once a year.
NOTE: Make sure the jet plates are installed correctly.
The nozzles on the jet plates should be pointing towards
the food.
To Next Page
Loading...
Need help?
General
