3.2 Fitting Secuquick softline and
closing
Check before each use of the
Secuquick softline:
The Secuquick softline is correctly assembled, the
valves and seals and lid clip are checked.
The sealing ring is placed properly.
The rim of the pot is clean and dry and not damaged
(no deformation).
The turning knob is in the open position.
Fitting Secuquick softline on the pot
Check position: turning knob in front, centred between
the handles.
3.3 Heating
Set pot on the hotplate
Keep the steam outlet facing away from
the body.
Switch on hotplate at highest level
Never use booster or power level with
high-performance stoves (induction stove).
Closing Secuquick softline
Hold both the handles and press well with both thumbs,
then close at turning knob.
Turn turning knob up to the end position.
The yellow mark should no longer be seen.
11
To Next Page
Loading...
Need help?
General
