5. What to do, when:
Secuquick softline does not close ... Secuquick softline does not open ...
There is little or no pressure in the pot ...
The turning knob cannot be turned in the position
“closed”.
Press on the Secuquick softline downward as the turning
knob is turned
Check if
you are able to easily turn the turning knob when
the Secuquick softline is lifted from the pot. If no, make
lid clip move smoothly as described under.
the sealing ring is placed in correctly.
a suitable pot is used.
the rim of the pot is clean, even and
undamaged.
The turning knob cannot be turned in the position “open”.
It moves a little and then gets jammed.
The pot is possibly not depressurised.
Depressurise pot
Take precautionary measures.
If the pot is depressurised
Turn the turning knob again completely to the position
“closed” and try again
Push the Secuquick softline downwards as the
turning knob is turned
The turning knob (when the Secuquick softline is
not yet tted on the pot) cannot be turned from the
position “open” to the position “closed” or is
sluggish..
Check if
the Secuquick softline is correctly assembled
(bellnut is tightly screwed).
the lid clip is dirty or if a foreign body is caught in it, if
require, clean it.
Move the turning knob back and forth a few times
The temperature display on Visiotherm S does not reach
the rst soft window or the rst turbo window.
Check if
the right hotplate diameter is chosen.
the stove is set at highest level.
sufcient liquid is added.
the Secuquick softline is completely closed (the turning
knob is turned clockwise until the end, the yellow
marking on the turning knob is no longer visible).
When steam constantly escapes under the lid:
20
To Next Page
Loading...
Need help?
General
