To open the Popular searches page.
6
-
Picture format
To open or close the Picture format menu.
9.2
IR sensor
The TV can receive commands from a remote control that uses
infrared (IR) to send commands. If you use this kind of remote
control, always point it at the infrared sensor on the front of the
TV.
Warning
Do not put any objects in front of IR sensor of the TV as it may
block the IR signal.
9.3
Batteries
If the TV does not react on a key press on the remote control,
the batteries might be empty.
To replace the batteries, open the battery compartment on the
back of the remote control.
1 - Slide the battery door in the direction shown by the arrow.
2 - Replace the old batteries with 2
AAA
batteries. Make sure
the + and - terminals line up correctly.
3 - Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for
a long time.
Safely dispose of your old batteries according to the end of use
directions.
For more information, in
Help
, press the color
key
Keywords
and look up
End of use
.
9.4
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the remote control.
24
To Next Page
Loading...
Need help?
General
