20
Channel installation
20.1
Antenna/cable installation
Search for channels
Update channels
You can always start a channel update yourself.
To start a channel update manually…
1 - Press the
Settings
key, select
Antenna/cable installation
and
press
OK
.
2 - Enter your PIN code if necessary.
3 - Select
Search for channels
and press
OK
.
4 - Select
Start now
and press
OK
.
5 - Select
Update channels
and press
OK
.
6 - Press
BACK
to close the menu.
Reinstall channels
Reinstall all channels
You can reinstall all channels and leave all other TV settings
untouched.
If a PIN code is set, you will need to enter this code before you
can reinstall channels.
To reinstall channels…
1 - Press the
Settings
key, select
Antenna/cable installation
and
press
OK
.
2 - Enter your PIN code if necessary.
3 - Select
Search for channels
and press
OK
.
4 - Select
Start now
and press
OK.
5 - Select
Reinstall channels
and press
OK
.
6 - Select your country and press
OK
.
7 - Select
Start
and press
OK
to update channels. This can take
a few minutes.
8 - Press
BACK
to close the menu.
Reinstall TV
You can redo the full TV installation. The TV is completely
reinstalled.
To redo the full TV installation…
1 - Press the
Settings
key, select
General settings
>
Reinstall
TV
and press
OK
.
2 - Enter your PIN code if necessary.
3 - Select
Yes
and press
OK
to confirm.
4 - The TV will perform a complete reinstallation. All settings will
be reset and installed channels will be replaced. The installation
can take a few minutes.
5 - Press
BACK
to close the menu.
Service navigation
Switch the availability to navigate through primary channels only
or all channels, on or off.
20.2
Channel list copy
Introduction
Channel List Copy is intended for dealers and expert users.
With Channel List Copy, you can copy the channels installed on
one TV onto another AOC TV of the same range, thereby
avoiding time-consuming channel searches by uploading a
predefined channel list to a TV. Use a USB flash drive with a
storage capacity of at least 1 GB.
Conditions
• Both TVs must be from the same year range.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as Q . . . LA
• Both TVs have compatible software versions.
Current software version
To check the current version of the TV software…
1 - Press the
Settings
key, select
Update Software
and
press
(right) to enter the menu.
2 - Select
Current Software Info
and press
OK
.
3 - The version, release notes, and creation date are shown.
Also, the Netflix ESN Number is shown, if available.
4 - Press
(left) repeatedly if necessary, to close the menu.
Copy a channel list
To copy a channel list…
1 - Switch on the TV. This TV should have channels installed.
2 - Plug in a USB flash drive.
3 - Press the
Settings
key, select
General settings
>
Channel
List Copy
and press
OK
.
4 - Select
Copy to USB
and press
OK
. You might be asked to
enter the Child Lock PIN code to copy the channel list.
5 - When copying is done, unplug the USB flash drive.
6 - Press
(left) repeatedly if necessary, to close the menu.
Now you can upload the copied channel list onto another AOC
TV.
52
To Next Page
Loading...
Need help?
General
