SCHEDULE AND HOLDS
SCHEDULE HOLDS (continued)
Heat Blast® (if installed)
Heat Blast will raise the current room
temperature by 3°F to 5°F once, and then
resume normal operation. This feature is
only available if it was enabled by your
installer and the thermostat is in Heat or
Emergency Heat mode.
1. Touch HEAT BLAST to activate Heat
Blast.
2. Touch HEAT BLAST again, or adjust
the temperature with the
or
arrows to cancel Heat Blast.
Away (if installed)
The Away feature allows the thermostat
to switch to predefined setpoints simply
by touching AWAY. The default cooling
setpoint is 85°F (29.5°C), the default
heating setpoint is 62°F (16.5°C) and the
default fan mode is Auto. The default
settings can be modified in the User
Preferences screen. See pages 33-35.
1. Touch AWAY to activate the Away
mode. Touch AWAY again to
deactivate the Away mode.
21
1
1
2
To Next Page
Loading...
Need help?
General
